Krea 2 Pro Grade w/ Image Edit, Style Transfer, Controlnet, Multi-reference, SAM3 Detailers, & Low VRAM options — v1.1 added rebalance

LC AV Nodes: https://github.com/lonecatone23/ComfyUI_LC_AV_nodes

LC Maskmaker Nodes: https://github.com/lonecatone23/ComfyUI_LC_MaskMaker_nodes

Instagram: https://www.instagram.com/synth.studio.models/

Buy me a☕ https://ko-fi.com/lonecatone

This represents hundreds of hours of work that I give away for free . If you enjoy it, Please make sure to 👍like and post to my workflows. That is how you support me. Also, feel free to ⚡tip 😉

Note: If you have ANY issues with nodes not downloading, read the notes or reach out. There's nothing that special about any of them that aren't core modules. Most issues can be resolved by updating everything

⛔⚠️🛑✋ Read the notes completly before using. Most common install and node problems are listed in the directions

A user and troubleshooting guide including a list of common error messages can be found here https://civitai.com/articles/24678/how-to-use-my-workflows-a-comprehensive-breakdown

All LC Notes now translate to the following:

English, 中文, 繁體中文, Русский, 日本語 ,한국어, Français, Español, عربي, Türkçe, Português (BR), فارسی, עברית, Italiano

V26.3

Hopefully the last version I publish for a minute. I have built out everything I wanted out of the Image side and now shifting over to the Dark Side and starting on videos.

What's changed.

Well, I added Vision Assistant. It's tied to my LC vision pack and can fix workflows, explain them to you, find missing files, replace bad nodes, tel you about the author, and take you on a guided tour.

I really am excited for this and I want you guy to try it and tell me what you think.

Read about it here: https://civitai.red/articles/36595/vision-assistant-your-workflow-sidekick

V26:

Lots of changes:

Removed Ultimate Upscaler. Why? VOSR2 does a better job and skin upscaler picks up the slack, plus paster processing times

Better Detailers. They now have tone match and talk to each other

VOSR2 (my version). Super fast upscale without the loss of quality. It alsop talks to my detailers so it doesn;t do the work twice

Skin upscale and skin texture now talk to the Detailers

minor adjustments to settings and bug fixes, especially DepthFx. now the haze works the way I want it to and rolls off

LC Natural Look 🍃: Removes the "AI" look from an image by pulling back the loudest colors and fixing the orange tint

V25:

Installed Speed boost 🚀 Read about it here https://civitai.red/articles/36132/speed-boost

Moved the detailer daemon to the lower sigmas

I wasn't happy with some thing below speed wise, so I tweaked them, especially DepthFX. Now it's about 20x faster

new sliders for the detailers

a timer ⏱️ that actually does something.

V24.1

"Many a Bothan died to bring you this workflow"

I started building my own nodes a while back. I was tired of the crap the community or ComfyUi offered.

So I looked at everyones. weeks of proof sheets and tests, thousands of comparison images, several articles, and something like 180 nodes built later, I can safely say that I have the best out there. Why? Because I took the best of what people had to offer and threw away what didn't work, and it's free!

Are they the easiest? No. The fastest? Sometimes. Do they deliver the best quality? Without a doubt. If there is a setting for it out there, It is proibably on this workflow

What I changed:

Notes in 16 different languages

Just click on a note dropdown and change it, or go into settings and change every single note to your language

Model Optimizer

All the speedups optimized for your computer witha full report and suggestions

It also will download the model for you if you want

All new sampler configure.

I took the best psrts of my old one and made it so they actually speak to each other. Smoother transition.

all of the original settings are now presets that actually do something

New Detailers

The old ones had a bug, plus they didn't work as well as they shoudl have.

My new ones are skin aware. They do an exceptional job

Allpaint

Inpaint, outpaint, rotate, change clothes, swap heads, expose ...ummm.. skin!

it does it all and all on the face of the node. No mask editor to open

All in one group.

Skin texture (beta)

builds skin pores and skin off of an image.

still beta, but tests are promising

Optical realism

depth aware node

pro mist on the Bloom filters

all the toys

V23: I made a bunch of cool stuff I wanted to share!

LC Note nodes: Now translate my markdowns into 13 different languages

Added backend attention. gained 5%. I'll take it

🍄Upgrades

LC Sharpen Pro: Gutted the logic. It's awsome now

Updated LC Bloom to do Halitation as well

added "The Look" presets. Basically my nodes now have presets that compiment each other so you do not have to figure out the best settings for each.

New Toy: LC Depth FX

Per a request from @Neriva , I finally got off my butt and redid Optical Realism so that it functioned properly

This node along with the Bloom and Lens node does a substantially better job than it ever did.

Tied into "the look" logic

Major note update

V21

Every other day I get "The slider's don't work", or "Qwen won't load" or something along those lines.

What's changed over the last few pushes:

LC Vision: The best LLM pack put there. Loads all its dependencies itself, can analyze 4 images, knows the difference, and loads abliterated models itself. Oh! It's fast. That, plus a moviemaker node that kills it when writing multiple prompts

LC Lighting Control V2: The old version was a huge hit on memory and was never how I wanted it. This one is a much better version and actually can cats real shillouette shadows.

A skin detailer Suite

Face it. USDU and skin LoRAs blow. I made a post production suite

VOSR 2.0 Upscaler

Seed VR2 died, and not politely. Bro just stopped updating. I came across the VOSR 2 nodes.

Look, let people say PID (which suuuuuucks), or latent, or yada, yada. This brings a pic to 8k on a potato 🥔 and fast!

A ton of simple nodes that I can't understand were never built before

better logic nodes

better math nodes

significantly better masking nodes

sigma splitters & graphs

Quality of life stuff like labelmakers and an add to custom colors that actuallty remembers the last ones you used even across refreshes.

Adds, fixes, and changes to my post production suite

A slider that actually works in Nodes 2.0 and older versions

For those of you have downloaded these, used these, and kept me at the top, I thank you for putting up with breaks and changes. Hopefully they pay off.

V19

I have tried every LLM enhancer node out there and they all were garbage 🗑️. The only one I liked was QwenVl, but it was problematic

Introducing LC Vision Nodes :

several nodes designed for image analysis, video analysis, prompt enhancement, and moviemaking

sets itself up so that you do not have hours of troubleshooting

automatically downloads the models, including abliterated

several presets to make your life easier

VRAM friendly, uses gguf models as well as full size ones

V18

I've been searching for a better solution for upscaling that SeedVR2 or PID (which suuuucks). After about a dozen different tries, I came across this: https://github.com/ylchen333/ComfyUI-VOSR2

What I've changed:

minor cleanups and organization

Redid notes (outdated)

Added VOSR2 Upscaler

Note: still messing around with the order of this. Directions to change it are in that area's instructions.

V17.0

Still making adjustments to settings in Post Production, so do not expect an " out of the box " perfectly adjusted image. Make your adjustments accordingly

In the process of building my custom nodes, I lost sight of how I had them ordered and how the clashed. I got a little ahead of myself. Also, I started really thinking about what worked and what didn't. These workflows are complex beasts and there are a lot of sections that I never use, or literally have designed plug-in modules when I have that one off, so I gutted or eliminated entire sections and rebuilt it.

What's been removed:

Style transfer removed and added 2 more reference images. Why? Because I have a moodboard and you can literally prompt "use the style in image 2"

Removed the Black and white + color section. I never used it. I also have a plug in module, so it becaame pointless.

The old Post Processing Suite. It was outdated and out of order. Replaced with a newer version

What's been added:

🪪 Identity Edit. Use either one or two images

Background removal

strength control

2 added reference Image 🖼️ slots

Both also have background removal

Completly revamped 🎨 Post Processing Suite

Includes my new Skin Upscaler

Ordered and categorized into groups that make sense

V16.2

Seed VR2 no longer works with current ComfyUI architecture, so I have decided to remove it entirely. I personally never really used it.

Minor tweaks that are not really that noticable, mainly a logic check for I2I

You do not need to update if you just want to bypass Seed VR2

V16

I really like messing with Sigmas. You can almost take any model and get it to do whatever you want once you understand what the curve does. So I built two nodes to accomplish this

Sigma resample: streches out the schedule but doesn't change the steps, really good for high/ low dual samplers because you can spend more time on one phase without messing up the step swap.

Sigma Curve: A cool node that lets you dynamically adjust the curve to achieve granular results.

This is a major jump in quality and unique to this set of nodes.

V15.0

Qwen broke my workflow.... again 🤬

Updated Qwen node

updated save nodes

made a minor change to the Sigma graph

OCD tweaks

V14.0

Man, I apologize to everyone for two stinkers in a row. I've been going through some stuff and was distracted. I found a better way to do something, then realized I had a break in the image reference.

What's Changed/ Fixed:

better reference control

the ability to remove the background of the second and third image (game changer)

some major OCD cleanup

V12.2 (oops)

Well, I go to all the trouble to make a Skin Beauty✨ node, launch it, then next workflow use the wrong post processing Suite.

What's changed:

Skin Beauty✨added back in

updated notes

V12.1

You'll need to update the node pack

Change to Color match

Change to LC Sharpen Pro

Change to Lut

Lut folder now auto downloads

Other tweaks

Updated Notes

LC123 Nodes: These nodes are BETA. If you do not like them , simply delete it and paste the old pack back in. You will only need to change the "Org pic" name on the getnode for the color correct. Also, please provide me feedback so I can adjust.

Added Skin Beauty ✨ Node

Added a whole VRAM performance setting in the ComfyUi Directory

V11.1

Added a notify 🔊 node with a huge list of sounds

Added Hold last image node

Added a better CivitAi 🚩remover that parses a long list of forbidden words.

V11

Introducing LC123 Nodes:

I fully rebuilt the entire workflow for these nodes.

Better Aspect Ratio contol and options

Better controlnet options

High and Low sigma samplers (yup)

Insane new Post processing suite

Removed 75% of the one off nodes and made better versions. Significantly less packs to download.

https://github.com/lonecatone23/ComfyUI_LC123_nodes

This was an insane amount of work. I'm sure there are bugs. PLEASE let me know if you have any issues.

V8.0

added my B&W to Color Plus suite...

Object Detector · Hugging Face