ComfyUI_JPS-Nodes

CLIPTextEncode SDXL Plus (JPS)

Encodes positive and negative text with an SDXL CLIP model and returns separate conditioning outputs. It attaches width, height, target-size, crop, and pooled-output metadata after scaling the requested dimensions by the resolution factor.

JPS Nodes/Conditioning · entrée 1 · paramètres 5 · sorties 2

Conditioning Switch (JPS)

Selects one of up to five conditioning inputs according to an integer index and returns the chosen CONDITIONING value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

ControlNet Switch (JPS)

Selects one of up to five ControlNet model inputs according to an integer index and returns the chosen CONTROL_NET value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Crop Image Pipe (JPS)

Unpacks a crop-settings pipe into source and support crop positions, their offsets, and the interpolation method for downstream nodes.

JPS Nodes/Pipes · entrée 1 · paramètres 0

Crop Image Settings (JPS)

Bundles source-image and support-image crop positions, offsets, and interpolation into one settings pipe for reuse across a workflow.

JPS Nodes/Settings · entrées 0 · paramètres 5 · sortie 1

Crop Image Square (JPS)

Crops an image to a square from a selected edge or the center, with zoom and x/y offsets. It can then resize the crop to a target resolution and apply sharpening.

JPS Nodes/Image · entrée 1 · paramètres 7 · sortie 1

Crop Image TargetSize (JPS)

Resizes an image while preserving aspect ratio, then crops it to an exact target width and height from a selected position with an optional offset and sharpening.

JPS Nodes/Image · entrée 1 · paramètres 6 · sortie 1

CtrlNet CannyEdge Pipe (JPS)

Unpacks Canny ControlNet settings into the selected source, conditioning strength and start/end range, plus low and high edge thresholds.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 6

CtrlNet CannyEdge Settings (JPS)

Bundles a Canny ControlNet source choice, strength, active sampling range, and low/high edge thresholds into a reusable settings pipe.

JPS Nodes/Settings · sortie 1

CtrlNet MiDaS Pipe (JPS)

Unpacks MiDaS ControlNet settings into the selected source, strength and start/end range, normal-map parameter, and background threshold.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 6

CtrlNet MiDaS Settings (JPS)

Bundles a MiDaS ControlNet source choice, strength, active sampling range, normal-map parameter, and background threshold into a reusable settings pipe.

JPS Nodes/Settings · sortie 1

CtrlNet OpenPose Pipe (JPS)

Unpacks OpenPose ControlNet settings into the selected source, strength and start/end range, and body, face, and hand detection switches.

JPS Nodes/Pipes · entrée 1 · paramètres 0

CtrlNet OpenPose Settings (JPS)

Bundles an OpenPose ControlNet source choice, strength, active sampling range, and body, face, and hand detection switches into a settings pipe.

JPS Nodes/Settings · sortie 1

CtrlNet ZoeDepth Pipe (JPS)

Unpacks ZoeDepth ControlNet settings into the selected image source, conditioning strength, and start/end sampling range.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 4

CtrlNet ZoeDepth Settings (JPS)

Bundles a ZoeDepth ControlNet source choice, conditioning strength, and active sampling range into a reusable settings pipe.

JPS Nodes/Settings · sortie 1

Disable Enable Switch (JPS)

Returns either “disable” or “enable” by comparing two integer values. The selected match mode determines whether equality enables or disables the downstream option.

JPS Nodes/Switches

Enable Disable Switch (JPS)

Returns either “enable” or “disable” by comparing two integer values. The selected match mode determines which state is emitted when the values are equal.

JPS Nodes/Switches

Generation TXT IMG Settings (JPS)

Converts a Txt2Img or Img2Img selection into a numeric generation-mode value and an image strength. Img2Img uses the entered percentage, while Txt2Img emits a near-zero strength.

JPS Nodes/Settings · sorties 2

Get Date Time String (JPS)

Produces the current date and time as a formatted string using the selected style and forces reevaluation so the timestamp does not stay cached.

JPS Nodes/Text · sortie 1

Get Image Size (JPS)

Reads an image tensor and returns its width and height as integers.

JPS Nodes/Image · entrée 1 · paramètres 0 · sorties 2

Image Prepare Pipe (JPS)

Unpacks general image-preparation settings into offsets, per-edge crop and padding values, interpolation, and sharpening outputs.

JPS Nodes/Pipes · entrée 1 · paramètres 0

Image Prepare Settings (JPS)

Bundles image offsets, per-edge crop and padding controls, interpolation, and sharpening into a reusable preparation-settings pipe.

JPS Nodes/Settings · entrées 0 · paramètres 12 · sortie 1

Image Switch (JPS)

Selects one of up to five image inputs according to an integer index and returns the chosen IMAGE batch.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Images Masks MultiPipe (JPS)

Passes a coordinated group of generation, IP-Adapter, and revision images and masks, plus an inpainting model, through separately typed outputs. It provides one junction for those optional workflow assets.

JPS Nodes/Pipes · entrées 9 · paramètres 0 · sorties 9

ImageToImage Pipe (JPS)

Unpacks image-to-image settings into img2img and inpaint strengths, mask growth, and unsampler strength, CFG, sampler, and scheduler outputs.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 7

ImageToImage Settings (JPS)

Bundles image-to-image, inpainting, and unsampling controls into a settings pipe, converting percentage widgets into the fractional strengths used downstream.

JPS Nodes/Settings · sortie 1

InstantID Mask Prepare Pipe (JPS)

Unpacks InstantID mask-preparation settings into mask source, resize and crop/stretch modes, offsets, per-edge crop and padding, interpolation, and sharpening.

JPS Nodes/Pipes · entrée 1 · paramètres 0

InstantID Mask Prepare Settings (JPS)

Bundles InstantID mask source, resize target, crop/stretch behavior, offsets, per-edge crop and padding, interpolation, and sharpening into a settings pipe.

JPS Nodes/Settings · sortie 1

InstantID Pipe (JPS)

Unpacks InstantID settings into IP-Adapter weight, ControlNet strength, noise, and start/end sampling values.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 5

InstantID Pose Prepare Pipe (JPS)

Unpacks InstantID pose-image preparation settings into resize target, offsets, per-edge crop and padding, interpolation, sharpening, and flip mode.

JPS Nodes/Pipes · entrée 1 · paramètres 0

InstantID Pose Prepare Settings (JPS)

Bundles InstantID pose-image resize target, offsets, per-edge crop and padding, interpolation, sharpening, and flip mode into a settings pipe.

JPS Nodes/Settings · entrées 0 · paramètres 14 · sortie 1

InstantID Settings (JPS)

Bundles InstantID IP-Adapter weight, ControlNet strength, noise amount, and start/end sampling range into a reusable settings pipe.

JPS Nodes/Settings · entrées 0 · paramètres 5 · sortie 1

InstantID Source Prepare Pipe (JPS)

Unpacks InstantID source-image preparation settings into resize behavior, offsets, per-edge crop, interpolation, sharpening, and flip mode.

JPS Nodes/Pipes · entrée 1 · paramètres 0

InstantID Source Prepare Settings (JPS)

Bundles InstantID source-image resize behavior, offsets, per-edge crop, interpolation, sharpening, and flip mode into a settings pipe.

JPS Nodes/Settings · entrées 0 · paramètres 10 · sortie 1

Integer Switch (JPS)

Selects one of up to five integer inputs according to an integer index and returns the chosen value.

JPS Nodes/Switches · entrées 0 · paramètres 6 · sortie 1

IP Adapter Settings (JPS)

Bundles IP-Adapter weight and weighting curve, noise, active range, crop/zoom/offset, mask source, interpolation, sharpening, and model choice into a settings pipe.

JPS Nodes/Settings · sortie 1

IP Adapter Settings Pipe (JPS)

Unpacks the single-image IP-Adapter settings pipe into its weight, curve, noise, range, crop, transform, mask, interpolation, sharpening, and model outputs.

JPS Nodes/Pipes · entrée 1 · paramètres 0

IP Adapter Tiled Settings (JPS)

Bundles tiled IP-Adapter model and weighting controls with tile size, zoom, offsets, preparation mode, interpolation, and sharpening into one settings pipe.

JPS Nodes/Settings · sortie 1

IP Adapter Tiled Settings Pipe (JPS)

Unpacks tiled IP-Adapter settings into model and weight controls, active range, tile size, zoom and offsets, preparation mode, interpolation, and sharpening.

JPS Nodes/Pipes · entrée 1 · paramètres 0

IPA Switch (JPS)

Selects one of up to five IPADAPTER inputs according to an integer index and returns the chosen adapter value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Largest Int (JPS)

Compares two integers and returns the larger value, the smaller value, and an integer flag indicating whether the first input was larger.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 3

Latent Switch (JPS)

Selects one of up to five latent inputs according to an integer index and returns the chosen LATENT value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Lora Loader (JPS)

Optionally applies a selected LoRA to both a model and CLIP encoder with independent strengths. When switched off, no LoRA is selected, or both strengths are zero, it passes the original model and CLIP through unchanged.

JPS Nodes/IO · sorties 2

Mask Switch (JPS)

Selects one of up to five mask inputs according to an integer index and returns the chosen MASK value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Model Switch (JPS)

Selects one of up to five model inputs according to an integer index and returns the chosen MODEL value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1

Multiply Float Float (JPS)

Multiplies two floating-point inputs and returns the product in both integer-truncated and floating-point forms.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 2

Multiply Int Float (JPS)

Multiplies an integer by a floating-point value and returns the product in both integer-truncated and floating-point forms.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 2

Multiply Int Int (JPS)

Multiplies two integers and returns the product as both an integer and a floating-point value.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 2

Prepare Image (JPS)

Scales and center-crops an image to a target size using crop percentages and x/y offsets, with selectable interpolation and optional sharpening.

JPS Nodes/Image · entrée 1 · paramètres 8 · sortie 1

Prepare Image Plus (JPS)

Prepares an image for a target size with optional axis flipping, per-edge cropping and black padding, positional offsets, interpolation, and sharpening. It can preserve aspect ratio by cropping or stretch directly to the target.

JPS Nodes/Image · entrée 1 · paramètres 16 · sortie 1

Prepare Image Tiled IPA (JPS)

Prepares an image for tiled IP-Adapter use by deriving target or tile-based dimensions, scaling and cropping with zoom and offsets, and optionally sharpening. Its mode can use target, source, square, or tile aspect and resolution combinations.

JPS Nodes/Image · entrée 1 · paramètres 9 · sortie 1

Resolution Multiply (JPS)

Multiplies a width and height by an integer factor and returns the resized dimensions.

JPS Nodes/Math · entrées 0 · paramètres 3 · sorties 2

Revision Settings (JPS)

Bundles crop size and interpolation plus two revision-image crop positions, offsets, strengths, and noise-augmentation values into a settings pipe.

JPS Nodes/Settings · entrées 0 · paramètres 10 · sortie 1

Revision Settings Pipe (JPS)

Unpacks revision settings into crop controls and the strength and noise-augmentation values for two revision images.

JPS Nodes/Pipes · entrée 1 · paramètres 0

Sampler Scheduler Settings (JPS)

Provides a paired ComfyUI sampler and scheduler selection through separate typed outputs.

JPS Nodes/Settings · sorties 2

Save Images Plus (JPS)

Saves each input image as a numbered PNG in ComfyUI’s output directory. It embeds prompt and extra workflow metadata unless metadata writing is disabled.

JPS Nodes/IO · entrée 1 · paramètre 1 · sortie 1

SDXL Basic Settings (JPS)

Builds an SDXL base/refiner settings pipe containing resolution, sampler and scheduler, total steps and base/refiner split, CFG values, aesthetic score, resolution factor, CLIP skip, and filename.

JPS Nodes/Settings · sortie 1

SDXL Basic Settings Pipe (JPS)

Unpacks the SDXL base/refiner settings pipe into its image-resolution flag, dimensions, sampler, scheduler, step split, guidance values, resolution factor, CLIP skip, and filename.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 14

SDXL Fundamentals MultiPipe (JPS)

Passes an SDXL workflow’s VAE, base and refiner models and CLIP encoders, positive and negative conditioning for each stage, and seed through separately typed outputs.

JPS Nodes/Pipes · entrées 9 · paramètre 1 · sorties 10

SDXL Prompt Handling (JPS)

Coordinates SDXL global and local positive prompt strings by copying, ignoring, or combining them according to the selected handling mode.

JPS Nodes/Text · sorties 2

SDXL Prompt Handling Plus (JPS)

Provides multiline, dynamic-prompt controls for coordinating SDXL global and local positive text by copying, ignoring, or combining the two strings.

JPS Nodes/Text · sorties 2

SDXL Prompt Styler (JPS)

Applies selected artist, movie, and general style templates to SDXL global and local positive prompts and the negative prompt. Optional Fooocus and universal-negative presets can extend the negative text.

JPS Nodes/Style · sorties 4

SDXL Recommended Resolution Calc (JPS)

Finds the supported SDXL resolution whose aspect ratio is closest to a requested width and height and returns that recommended width and height.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 2

SDXL Resolutions (JPS)

Converts a selected recommended SDXL aspect-ratio preset into its exact width and height.

JPS Nodes/Settings · sorties 2

SDXL Settings (JPS)

Builds a compact SDXL settings pipe containing resolution, resolution factor, sampler, scheduler, steps, CFG and CFG-rescale values, CLIP skip, and filename.

JPS Nodes/Settings · sortie 1

SDXL Settings Pipe (JPS)

Unpacks the compact SDXL settings pipe into its image-resolution flag, dimensions, resolution factor, sampler, scheduler, steps, guidance values, CLIP skip, and filename.

JPS Nodes/Pipes · entrée 1 · paramètres 0 · sorties 11

Substract Int Int (JPS)

Subtracts the second integer from the first and returns the result in both integer and floating-point forms.

JPS Nodes/Math · entrées 0 · paramètres 2 · sorties 2

Text Concatenate (JPS)

Joins up to five optional text inputs in order, using no delimiter, a space, or a comma as selected.

JPS Nodes/Text · entrées 5 · paramètre 1 · sortie 1

Text Prompt (JPS)

Provides a multiline dynamic-prompt string and returns the entered text unchanged.

JPS Nodes/Text · entrées 0 · paramètre 1 · sortie 1

Text Prompt Combo (JPS)

Provides separate multiline positive and negative prompt strings and returns both unchanged through dedicated outputs.

JPS Nodes/Text · entrées 0 · paramètres 2 · sorties 2

Time Seed (JPS)

Returns the supplied fixed seed and uses the current time plus randomness in its change token so the node can force reevaluation.

JPS Nodes/Text · entrées 0 · paramètre 1 · sortie 1

VAE Switch (JPS)

Selects one of up to five VAE inputs according to an integer index and returns the chosen VAE value.

JPS Nodes/Switches · entrées 5 · paramètre 1 · sortie 1