Loading
¿Tienes un flujo de trabajo de ComfyUI? Obtén un Workflow Doc legible en tu navegador.Haz legible un flujo de trabajo.Pruébalo ahora ↗
V1.2.2 adds automatic toggle for landscape/portrait derived from input image.
Perfil de ejecución
Descripción de la fuente
** Latest version changes:
V1.2.2 adds automatic toggle for landscape/portrait derived from input image. **
Based on WAN-KR this is a multi-clip workflow that can combine up to 4 clips.
Being that this is currently a simple feed of the last frame into the next clip it has the known drawback of losing context if something is covered up in the former clip. See the example clip where Hades Model covers her necklace and it changes form. Also sometimes the sudden change of movement between clips is noticeable because the AI as no memory of the movement vector - Still, often it does work pretty well.
HOW TO: Generate your init clip. If satisfied enable CLIP_2, add your prompt, generate. If not satisfied with clip 2, change the prompt or just the seed and regenerate clip 2, clip 1 remains untouched and needs not to be redone. ( Important: Do not start Comfy with "cache none", as this will disable the node cache too and this is the whole point of the workflow.)
Comentario generado por IA
Explicación generada por IA basada en los detalles de la fuente y la configuración. Las sugerencias están claramente identificadas.
This workflow is for creating a multi-clip video from an input image, per-clip prompts, and seeds with Wan Video 2.2 I2V-A14B; it can combine up to four clips and optionally interpolate or upscale the result.
Generate the initial clip, then enable CLIP_2, add its prompt, and review the 1+2 combination before continuing.
Sugerencia · sin verificar
If clip 2 needs changes, adjust its prompt or seed and regenerate it while clip 1 stays unchanged; repeat for CLIP_3 and optionally CLIP_4.
Sugerencia · sin verificar
Use an initial image, a prompt for each enabled clip, and seeds; custom dimensions can also be supplied for Kijai selector presets.
The workflow produces combination previews and a combined video, with optional interpolation and upscaling.
For Kijai selector resolution presets, place the JSON with custom dimensions in `ComfyUI\custom_nodes\comfyui-kjnodes\`.
Sugerencia · sin verificar
Do not start Comfy with `cache none`, because this disables the node cache used by the workflow.
Sugerencia · sin verificar
The workflow lists these node packs: `comfyui-easy-use`, `ComfyUI-GIMM-VFI`, `comfyui-kjnodes`, `comfyui-mxtoolkit`, `comfyui-videohelpersuite`, `SeargeSDXL`, `pr-was-node-suite-comfyui-47064894`, and `was-node-suite-comfyui`.
The workflow lists these model files: `gimmvfi_r_arb_lpips_fp32.safetensors` and `OmniSR_X2_DIV2K.safetensors`.
Version 1.2.2 adds an automatic landscape-or-portrait toggle based on the input image.
Choose the GGUF checkpoint from Q8, Q6, Q5, or Q4 for your machine; to use FP8, swap the GGUF loader for the normal loader.
Sugerencia · sin verificar
Each new clip receives only the previous clip’s last frame, so covered details may change and movement shifts between clips may be noticeable.
For long, high-resolution clips, avoid a 4x upscaler when memory or VRAM is limited; swapping has occurred in some cases even with 96 GB.
Sugerencia · sin verificar
¿Es necesario editarlo?
Inicia sesión para solicitar una edición.
Fuentes
1 fuenteExtractos de fuentes
1 extractoSource context: 2148 downloads · Type Workflows · Base model Wan Video 2.2 I2V-A14B
If satisfied with clip 2 and the combination 1+2 preview, move on to CLIP_3, repeat procedure. Clip 1 and 2 remain untouched due to locked seed.
Optionally move on to clip_4, although you can always stop combining after 2 or 3 clips.
As final step, combine and optionally interpolate and upscale the result.
To use the resolution preset for Kijai selector node put the JSON with the custom dimensions into the ComfyUI\custom_nodes\comfyui-kjnodes\ folder. If you don't need all those resolutions just edit the file down.
If you have your prompts/storyboard nailed down and want to generate some complete clips without checking the transitions, you can simply set the initial seed to random/increment, keep the seed on 2+3+4 locked, enable clip2-4 as well as combine clip and then you can pipe several runs into ComfyUI pipeline.
Navigating this behemoth can be done easily with the Bookmarks/quick keys 1-9, I and K which can be customized. Also there are locked yellow group bypasser to jump back to control panel.
Depending on your machine you need to change the GGUF checkpoint from Q8 down to Q6, 5 or even 4. If you want the fp8 for whatever reason just swap out the GGUF loader to the normal one.
Q: Do I need all those Lightning/LX2V LORAs?
A: No. But if you ask 5 people which are best, you'll get 5 answers, like A,B, C or mix of A+B or whas it A+C?, so during testing I implemented the enabler/mixer for convenience. If in doubt, just stick with either Kijai's latest or the seko variant from the Original team (all links in WF) - for now, until the next best thing comes along.
Upscaling a long and hi-res clip can be tricky on memory/VRAM. I would advise to not use a 4x model in that case. Even with 96Gb I got some swapping in some cases.
Hardware and download-size estimates are not available yet.
Requisitos
gimmvfi_r_arb_lpips_fp32.safetensors
No resueltoCheckpoint · Unknown
Upscaler · Unknown · SHA-256 79408fc23203
comfyui-easy-use
EncontradoPaquete de nodos · Registry
ComfyUI-GIMM-VFI
PosiblePaquete de nodos · Registry
Paquete de nodos · Registry
comfyui-mxtoolkit
EncontradoPaquete de nodos · Registry
comfyui-videohelpersuite
EncontradoPaquete de nodos · Registry
pr-was-node-suite-comfyui-47064894
No resueltoPaquete de nodos · Registry
Paquete de nodos · Registry
was-node-suite-comfyui
PosiblePaquete de nodos · Registry
